The selected product display requires Javascript enabled in your browser. Please enable Javascript and try again!

EasyIO Sedona Controllers | EASYIO-FC20 EasyIO-FC20 Sedona Programmable Zone Controller, 20-Points

The SyxthSense EasyIO-FC20 series is aimed at affordable ‘canned’ solutions for standalone applications, such as Zone Controls, Roof Top Units, Fan Coils, AHU’s, package units etc. The EasyIO-FC20 is designed to complement the SDC-30 and SDC-20G/32G series of awarding wining excellence.

All of the EasyIO-FC20 controllers are equipped with two RS485 ports. If Etnernet port is required, use SDC-30/20G/32G. The EasyIO-FC20 controllers are BACnet and Modbus Selectable and can be programmed via the CPT Tool from Online Tools Inc. The EasyIO-FC20 has 20 points of I/O and priced to meet most high volume applications and price points.

The 20 IOs include, 12 Universal Inputs (UI) supporting current, voltage and resistance based sensor and digital volt-free signals, 4 electrically isolated Digital Outputs (DO) and 4 Analog Inputs supporting current and voltage outputs. The EasyIO-FC20 comes with one standard RS485 driver to support either BACnet MSTP or Modbus RTU communication (selection via hardware dip-switch). This communication port is also used as configuration/ setting and firmware upgrade. The concept behind the EasyIO-FC20 series is that the EasyIO-FC20 is configured can be used as an input/output controller only, or an Application Specific Application Controller. There is also a Real-time clock and a second RS485 (reserved for communicating with other Modbus devices such as Power Meters) are provided for such application.

Features:-

  • Sedona Framework™ support -programmed using Online Tools inc. CPT Tool
  • BACnet MS/TP Server Functionality Support
  • Modbus RTU Slave Support
  • 12 Universal Inputs; Digital, Voltage, Current or Resistance
  • 4 24VAC relay Outputs
  • 4 Analogue Outputs; Voltage or Current
  • DIP Selectable Communication Mode

EasyIO FC20 Controller Networking Example to EasyIO Systems

The Sedona Framework™, Niagara Framework™, JACE™ are trademarks of Tridium, Inc. HAWK™ is trademark of Honeywell Corporation.

 

Technical Specification:-

Power Supply: 24VAC/DC
Programming: Using Online Tools CPT Tool and the virtual FC Controller Application
Universal Inputs: 12 Universal Measurement Inputs
  Voltage: 0..10Vdc
  Current: 4..20mA
  Resistance: 0..30kOhm
  Digital: Volt-Free
Relay Outputs: 4 Relays, 2A 24VAC
Analogue Outputs:

4 Analogue Outputs

  Voltage: 0..10V
  Current: 4..20mA
Communication Port 1: EIA-485 Two-Wire (RS485)
  Application Protocol: Modbus RTU Serial, BACnet MS/TP
Communication Port 2: EIA-485 Two-Wire (RS485)
  Application Protocol: Modbus RTU Serial
Mounting DIN-rail or Wall Mounting
Protection: IP20
Dimensions: W198 x H104 x D44 mm
£