The selected product display requires Javascript enabled in your browser. Please enable Javascript and try again!

EasyIO Sedona Controllers | EASYIO-FG32plus EasyIO-FG32plus Cloud Ready HTML5 Controller, 32-Points

EasyIO-FG32+ is a freely programmable 32-point HTML5 graphics controller using Sedona Framework™. The EasyIO-FG32+ controllers are programmed with Sedona Workbench or NiagaraAX Workbench, or with the Open Source CPT tool. The controller are fully networkable using the Open Standards and offer both Modbus as well as BACnet communication. The controller can act as a BACnet IP or MS/TP server. The controller has can also be Modbus client over TCP/IP or over RS-485 serial connection. If the RS-485 serial connection is not used to other communications then the SDC controller can also be used as Modbus master to up to 32 Modbus slaves. The controllers can act as a BACnet IP or MS/TP Client.

The controller has 16 universal inputs, 8 digital outputs and 8 universal outputs which guarantee flexibility to a large number of the applications. The controllers support miniSD card allowing large amounts of data (historical and graphics configuration) to be stored on the device.


  • Sedona Framework™ support - the industry's first open source development framework developed by Tridium, Inc. The framework allows free programmability, and a large number of applications libraries developed for SyxthSense SDC range controllers guarantee funtionality to practically any application. Furhermore, should the Sedona Framework allows further enhancements to applications as and when required.
  • Programming HTML5 graphics and controller application via Online Tools inc CPT Tool.
  • SDC Controllers Supports 10/100 Base-T Ethernet Connection for Programming, HTML5 Web Interface, BACnet IP, Modbus TCP and TCOM
  • Two built-in RS 485 ports allows the controller operate as Modbus Slave or Modbus Master, and as BACnet MS/TP client.
  • Can act as a mini Modbus to BACnet gateway for up to 32 Modbus Slaves
  • High Accuracy A/D converter provides up to 12-bit resolution to analogue channels
  • Built-in miniSD card interface supports up to 16GB data storage and graphics.
  • Controller LEDs indicate the status of inputs/outputs as well as the communication status
  • Firmware is upgradable over TCP/IP providing remote firmware upgrade path
  • Sedona Object Library Includes the most commonly used programming objects e.g. PID-loop, holiday, time schedule, logic programming, mathematical functions, email transmission, historical trend, phychometric chart, temperature vs. resistance, BACnet, Modbus and other objects

EasyIO FG32 Cloud Ready DDC Controllers

The Sedona Framework™, Niagara Framework™, JACE™ are trademarks of Tridium, Inc. HAWK™ is trademark of Honeywell Corporation.


Technical Specification:-

Power Supply: 24VAC/DC
Programming: Using Sedona Workbench, NiagaraAX Workbench (Sedona Framework™) or Online Tools CPT Tool
Universal Inputs: 16 Universal Measurement Inputs
  Voltage: 0..10V or 0..5V
  Current: 0..20mA
  Resistance: 500..500kOhm
  Digital: Volt-Free
Relay Outputs: 8 Relays, 1A 30VDC
Universal Outputs:

8 Universal Outputs

  Voltage: 0..10V
  Current: 0..20mA
  Digital Mode: Maximum Sink Current 200mA
Communication Port 1: EIA-485 Two-Wire (RS485)
  Application Protocol: Modbus RTU Serial, BACnet MS/TP
Communication Port 2: EIA-485 Two-Wire (RS485)
  Application Protocol: Modbus RTU Serial, BACnet MS/TP
Communication Port 3: Ethernet 10/100 Base-T Support for OP, UCP, TCP, ICMP, FTP, HTTP
  Application Protocol: BACnet IP, BACnet Ethernet, Modbus TCP and Sedona SOX
Mounting DIN-rail or Wall Mounting
Protection: IP20
Dimensions: W233 x H124 x D44 mm