|
|
General Purpose Controllers | TAE-DIN Din-Rail Mounted Temperature Controller
|
The TAE-DIN rail mounted controller is a compact and
cost effective solution for monitoring air or liquid temperature.
The units have two analogue outputs as standard,
remote setpoint input, temperature sensor input, low limit
sensor input and setback input. The outputs can be used
to control various terminal devices ie. damper motors,
valve actuators, step controllers, relay modules, power
controllers etc.
|
|
 |
|
| |
|
Features:-
- 2 Analogue Ouputs - Heating / Cooling
- Proportional or Proportional-Integral Control
- 2 Cooling Stages, Heating and Cooling or 2 Heating Stages (configurable)
- Remote Setpoint Option
- Adjustable Setback
- Adjustable Proportional Band
- Adjustable Integral Time
- Output Voltage can be display
- Minimum Supply Temperature Control
- DIN-rail mounting
|
|
| |
|
 |
|
|
| Power Supply: |
24Vac/dc, typically 40mA |
| Measurement: |
Buil-In Duct NTC10K3 Temperature Sensor |
| Inputs: |
Control Temperature: -10..+110°C
Low Limit Temperature: -20..+20°C
External Setpoint: 1..11kOhm
Setback: Volt-Free Contact
|
| Outputs: |
2 x 0..10Vdc or 2..10Vdc |
| LCD Display: |
2 Line 8 Digit LCD with backlight |
| Set Up Buttons: |
Increase, Menu, Decrease |
| Settings: |
Setpoint Range: -10..110°C
Low Limt: Off, -20..+20°C
Setback: 0..+30°C
Deadband: 0..+30°C
Proportional Band: 1..30°C
Integral Time: Off, 1..500 secs
Mode Select: Cool-Cool, Heat-Cool, Heat-Heat
External Setpoint: None, +/-4°C, +/-20°C
Output Values: 0..10V or 2..10V |
| Temperature Element: |
NCT10K3 such as TEK-NTC10 |
| Terminals: |
0.5 to 2.5mm2 Cable |
| Mounting:: |
DIN-rail |
| Dimensions: |
W82 x H68 x D47mm |
|
|
|
|
